MECHANICAL PANEL- P-30 |
||
 |
 |
 |
| CIP P-30M | OLD P-30 | CIP P-30M LAYOUT |
The CIP P-30M Chevy Chassis panel is designed to replace the instrument panel that is standard on motorhomes from the years prior to 1990. It comes with analog gauges, engraved warning lights for more elegant, sophisticated, driver friendly command controls. The precise placement of instruments enhances the pleasure and ease of driving.
Our panels are made of durable ABS rigid plastic. Its properties include good impact resistance characteristics. Easy installation. It virtually fits into the same space, however some modifications will be necessary for the CIP Panel with the Tach. The panel opening must be at least 5"x 13". The corners must be squared in order for the panel to fit. This only applies to the replacement panel with the tachometer. The standard replacement will fit.
In order for this unit to just plug in, we would need to know if your panel has one GM plug or two in the back of the panel, otherwise some wiring will be necessary. Our panel comes with a 2-Year Limited Warranty and an owner's manual with easy to read diagramed instructions on how to install your panel.
Functional and easy to read, describe the P-30M panel with Teleflex gauges. The instrumentation used as standard on the P-30M panel is as follows:
|
CIP-P-30 |
|
|
HARDWARE |
Gauges |
|
Panel mounting screws |
Speedometer with trip odometer |
| Fuel Gauge* | |
| Voltmeter-12 Volt | |
| Oil Pressure Gauge & 80 psi Sending Unit | |
| Tachometer | |
| Water Temp. Gauge & Sender | |
Price......................................................................................... $549.50
Replacement Panels (CHEVY P-32)
1991-1997 |
||
 |
 |
 |
CIP P-32 NEW DIMENSIONS |
CIP P-32 |
Chevy original '91-'97 |
ELECTRONIC PANEL ELECTRONIC PANEL REPLACEMENT
The New CIP P-32 is designed to replace the factory instrument panel that is standard on the Chevy Chassis with the P-32 cluster gauges. It comes with analog gauges, engraved warning lights for more elegant, sophisticated, driver friendly command controls. The precise placement of instruments enhances the pleasure and ease of driving.
Functional and easy to read, describe the P-32 panel with Teleflex gauges. The instrumentation used as standard on the P-32 panel is as follows:
|
P-32 CIP |
|
|
HARDWARE |
Gauges |
|
Panel mounting screws |
Speedometer with trip odometer |
| Fuel Gauge | |
| Voltmeter-12 Volt | |
| Warning Light Bar
|
Oil Pressure Gauge & 80 psi Sending Unit |
| Transmission Gauge & Sending Unit . | |
| Water Temp. Gauge & Sender | |
| Tachometer | |
Our panels are made of durable ABS rigid plastic. Its properties include good impact resistance characteristics. Easy installation. It virtually fits into the same space, however some modifications will be necessary for the CIP Panel with the Tach. The panel opening must be at least 12 3/8" wide by 7" high in order for the panel to fit. Overall the panel measures 14 1/16" by 8 1/4".
The wires plug into the same plug for all original wires. There is one new (2) two-pin plug for the new wires, tachometer and transmission temperature gauge. Also there are three senders; oil pressure, transmission temp, and water temp that must be installed.
Our panel comes with a 2-Year Limited Warranty and an owner's manual with easy to read diagramed instructions on how to install your panel.
TOTAL PRICE FOR P-32 PANEL...................................................................................$719.89